Digimax 300K Pixels Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Cámara digital Digimax 300K Pixels. Digimax 300K Pixels 16 páginas.

Page 6

Turn off the camera

1. Press the "Function" button once, LCD will display "oF"

2. Press the "Shutter" button within 5 seconds to turn off the camera swiftly.

Note: This will not take effect when connected to USB

Auto-Shoot Mode

1. Press the "Function" button twice and the LCD will display "St";

2. Press the "Shutter" button within 5 seconds to enter the 10-second time to

set auto-shoot state, and the camera will give out a sound every second.

After 10 seconds, the camera will give out a longer sound to indicate the

photo has been taken.

Continuous Shoot Mode:

1. Press the "function" button three times and the LCD will display "d8";

2. Press and hold the "Shutter" button within 5 seconds to start the

continuous shoot.

3. Release shutter button to stop the continuous shoot.

Note: During the continuous shooting period, an alternative exposure will

appear to allow for a longer continuous video to be made.

Delete All Photos

1. Press the "Function" button four times and the LCD will display "CA";

2. Press the "Shutter" button in 5 seconds to delete all photos in the camera.

Delete the last photo

1. Press the "Function" button five times and the LCD will display "CL".

2. Press the "Shutter" button within 5 seconds to delete the last photo.

Image Quality Mode Toggle

1. Press the "Function" button six times and the LCD will display "HI/Lo";

2. Press the "Shutter" button in 5 seconds and the image quality mode will

change between either Hi and Low Resolution.

Image Compression/Normal Shift

1. Press the "Function" button seven times and the LCD will display "Hd/Ld";

2. Press the "Shutter" button within 5 seconds and the change between

image compression/normal can be achieved.

NOTE: LCD can only display up to 99 on the LCD display, but it will actually

hold over 99 pictures in it's memory given the Resolution and Compression

Settings you set up.

Light System Toggle

1. Press the "Function" button seven times and the LCD will display "60/50";

2. Press the "Shutter" button within 5 seconds and the shift of 50/60Hz light

system can be achieved.

DigiMax Camera Installation Guide v1.0