Cressi 30628 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Instrumento de buceo Cressi 30628. Cressi 30628 19 páginas. B.c. 's jackets

COMPATIBLE CYLINDERS

All diving cylinders with 10/12/15/18 Litre capacity or with 171 to 216 mm

diameters are compatible.

INTEGRATED WEIGHT POCKETS

The Aquawing + model is equipped with a system that allows you to insert the

weights directly into special pockets. Thanks to this solution, the diver is not

required to wear all the weights in the waist belt, allowing for a smoother and

more gradual release in an emergency.

i WARNING!

FOR SAFETY REASONS, IT IS RECOMMENDED TO KEEP THE

WEIGHT BELT AT THE WAIST WITH A MINIMUM AMOUNT

OF WEIGHT IN ORDER TO MAKE THE DIVER'S POSITION

MANAGEABLE EVEN IN THOSE SITUATIONS IN WHICH THE BCD

WEIGHT POCKETS HAVE BEEN COMPLETELY RELEASED SO AS

TO AVOID DANGEROUS UNCONTROLLED ASCENTS.

INTEGRATED WEIGHT POCKETS

This system is very simple, consisting of two fixed pockets located next to

the backplate. Inside the pocket, there is a special weight pouch with a velcro

fastening and a handle. To release the weight, simply open the quick-release

buckle that fastens the pocket with two fingers (fig. 15-16-17) and take the

pouch by the handle if you want to keep the pouch (fig. 18-19-20); otherwise,

the weight will fall away by gravity. Obviously, if you want to release the weight

by gravity, you will need to be in a vertical position with your head towards the

surface, since it is the force of gravity that will free you from the weight. The

maximum amount of weight that can be inserted is 3 kg per pocket.

REAR POUCHES (CYLINDERS)

Each pouch can hold 2.5 kg (max. 5 in total).

For more information, see figure 56 on page 28.

AVAILABLE ACCESSORIES

Two type of accessories are available that can be assembled on both the

Aquawing and Aquawing+ models of vest:

• Integrated ballast system. Two pockets, one left and one right, complete

with weight pockets, to the side of the backpack. See the "Integrated ballast

system" description in the previous chapter.

• D-ring system. Two D-ring base plates (one right, one left) to the side of the

backpack.

For correct assembly, please refer to the instructions available for download

from cressi.com in the dedicated section for support/operating manuals).