Digimerge DPD24DL Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Cámara IP Digimerge DPD24DL. Digimerge DPD24DL 14 páginas. Ultra resolution day & night ir dome camera
También para Digimerge DPD24DL: Manual de instrucciones (14 páginas)
Imprimir página
CAMERA ADJUSTMENT
MOTION DET
OFF / ON
Motion Detection is defined by rectangular areas. This give a visual identification
of motion areas.
MOTION DET
DETECT SENSE
BLOCK DISP
OFF
MOTION AREA ON
AREA SEL
1 / 4
TOP
BOTTOM
LEFT
RIGHT
RETURN
DETECT SENSE:
Sets the motion detection sensitivity
BLOCK DISP:
ON/OFF/ENABLE status of the motion detection
block display.
ON: Make motion areas visible, OFF: Hide motion areas
ENABLE
Press enter to access the
screen, on-screen cursor moves in response to the
inputs Left, Right, Up and Down to set the sensing area,
or dead band for specified blocks. This allows you to
specify and set an area of motion which is not
rectangular in shape.
Press and hold SET button 3 seconds to exit.
MOTION AREA:
ON / OFF Enable / Disable Area No.
AREA SEL: 1/4 / 2/4 / 3/4 / 4/4. Selects motion area number.
TOP:
Set the top side of the monitoring frame selected by the AREA SEL
parameter.
-18-
111
000
000
000
000
"dead band setting"
CAMERA ADJUSTMENT
BOTTOM:
Set the bottom side of the monitoring frame selected by the AREA
SEL parameter
LEFT:
Set the left side of the monitoring frame selected by the AREA SEL
parameter.
RIGHT:
Sets the right side of the monitoring frame selected by the AREA SEL
parameter
CAMERA ID
OFF / ON
Camera ID shows a name on the screen as chosen.
CAMERA ID
CAMERA
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!#$%&'
()_`.:;<=>
@^*./^*X+/
CHR1 CHR2
CLR POS
RETURN
Use Up/Down/Left/Right to move around. CHR1/2 changes the selection fonts to
alternative selection, CLR will clear info. POS allows position change.
-19-