Accusound AC-AMA-1 Manual - Página 6

Navegue en línea o descargue pdf Manual para Amplificador Accusound AC-AMA-1. Accusound AC-AMA-1 8 páginas. Acoustic amplifier

playing your harp until the LED starts to illuminate RED. Now turn the green

knob slightly anti-clockwise so the LED only illuminates green, perhaps with a

very occasional red flash. Don't be concerned if the LED does not flash Green, it

simply means that your instrument has a low, but probably useable signal.

Next turn the white "Master" knob, bottom right, to 4 or 5 and turn the white

knob just under the green "Gain" knob to 3 or 4.

Now play your harp, sound should be coming from the amplifier.

If it is too quiet or you cannot hear any sound, turn the white knob under the

green "Gain" knob to 5 or 6 or further until you can hear yourself play.

If you need to turn this knob to 8 or above, then also turn the "Master" white

knob to 5 or 6 or above until you get the level of sound you require.

You are now setup.

It is better to have the Green and/or White knob at the top high and the white

"Master" knob low rather than the other way round.

If you are using two instruments then do the same with the other instrument,

plugging it into Channel 2.

Use the white knobs at the top right to balance the level between the two

instruments and the white "Master" knob at the bottom right to increase or

decrease the overall level.