Diginet DGOZ-OS-PIR-360 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Accesorios Diginet DGOZ-OS-PIR-360. Diginet DGOZ-OS-PIR-360 9 páginas. Pir occupancy sensor

Imprimir página

RAPIX Lighting Control System

8. Operation and Configuration

Upon power-up the sensor performs an initialisation which takes approximately 45 seconds. Once the

initialisation is complete, normal operation commences and full sensitivity is reached after a period of

approximately 5 minutes.

When the sensor is powered and functional, green and red LEDs within the sensor head will indicate

mode/operation as defined in the table below.

Mode

Normal Operation

Walk Test Mode

Setting time delay and light level threshold

The time delay and light level threshold settings are

easily configured after installation by using the

patented push in-pop out mechanism.

Press gently on the lens until a click is heard then

release to access sensor adjustment sliders.

Press gently on the head until click is heard to return

to normal operating position.

The tables below detail the parameters for the time delay and ambient light level adjustable settings.

Settings for adjustable time delay

Position

Time Delay *

†

In Walk Test Mode the output will activate for 5 seconds only

Note: The eHub can also set timing for the sensor, see the application note on the Diginet Web Site.

Settings for adjustable light level threshold

Position

∞

4 (Factory default)

* If the ambient light has exceeded the set threshold, the Occupancy Sensor will send an ON signal to the eHub

Note: The lux level threshold values shown above refer to the minimum light level incident on the sensor. Typical

room light levels are considerably larger. Surfaces and materials in the space being controlled will determine the

amount of reflected light onto the sensor head.

LED Indicator

Green LED OFF

Green LED ON

Red LED ON

Green LED "Flashing"

Red LED "Flashing"

†

5 Sec

Walk test: test light level setting and to confirm effective field of view

5 Mins

Halls & passages

10 Mins

Store rooms

15 Mins

Tea rooms

20 Mins

Enclosed offices, meeting rooms, bathrooms

25 Mins

Open plan offices, reception areas

Lux Threshold*

Disabled

Test setting to confirm effective field of view

20 Lux

Halls and passages

40 Lux

Store rooms, tea rooms, bathrooms

80 Lux

Closed offices

160 Lux

Open plan offices, meeting rooms

320 Lux

Reception areas

Condition

Ambient light below threshold setting

Ambient light above threshold setting

Manual override activated

Ambient light above threshold setting

Movement detected

Typical Application

RAPIX PIR Occupancy Sensor