Diginet LEDsmart+ MMDM RT Manual - Página 5

Navegue en línea o descargue pdf Manual para Regulador de intensidad Diginet LEDsmart+ MMDM RT. Diginet LEDsmart+ MMDM RT 12 páginas. Setup functions

C: Setting Maximum Brightness

The maximum brightness level provided by the dimmer can be set to suit customer requirements.

Note that when lamps are dimmed near to full brightness, it is difficult to see changes in dimming level. Therefore,

when setting up maximum brightness, it is recommended that the lamp is slowly dimmed up to a point where no

further changes in brightness can be seen, and the maximum level set at this point.

Step 1

Enter into the dimmer Setup Mode - See PART A

Step 2

Click the dimmer rotary shaft three times

Step 3

LED will blink 3 times

Note: To cancel/exit do nothing for 30 seconds

Note: If more than one dimmer is connected to the same load, all dimmers connected

to this load will now blink 3 times

Step 4

Adjust dial to required maximum brightness level

Note: To cancel/exit do nothing for 30 seconds

Step 5

Click once to save & exit

Note: If more than one LEDsmart

brightness levels only needs to be set in one device. The setting is automatically saved

to all other devices connected in parallel

device is connected in parallel, the minimum

Setup Functions - Rotary Dimmer/Switch