Diginet RAPIX eHub Manual de instalación - Página 2
Navegue en línea o descargue pdf Manual de instalación para Sistemas de control Diginet RAPIX eHub. Diginet RAPIX eHub 16 páginas. Lighting control system
Imprimir páginaRAPIX Lighting Control System
1. Product item
This guide provides user operation and product specification information for the RAPIX Lighting Control System
'eHub', item number DGOZ-EHUB-4G-2S.
2. Product package contents
The eHub package includes the following:
• 1 x eHub
• 1 x 12V dc SELV power supply.
3. Important notes and safety information
WARNING
guide and on the product while working in accordance with the latest electrical safety
practices.
•
The eHub does not have a mains supply connection. DALI Lines operate on an ELV dc supply between 9.5V
and 22.5V but must be considered at mains potential due to basic equipment isolation and cable
segregation between mains and DALI. DALI is Functional Extra Low Voltage (FELV) as defined by standard
IEC61140
•
The installer must be suitably qualified and should work in accordance with standard safety procedures
for mains-powered electrical equipment
•
Appropriate segregation is to be maintained between the SELV/Data cabling and mains/DALI Line cabling
in accordance with local regulations
•
There are no user serviceable parts inside the eHub. Do not attempt to disassemble or operate the device
with any covers removed
•
The eHub is intended for indoor use
•
Outdoor installations will require the device to be housed in a suitable IP rated enclosure
•
Consult the manufacturer's instructions for Lighting Control Gear and other DALI units that may be
connected to the DALI Lines.
If you require information or assistance regarding the installation, configuration, or operation of the eHub,
contact Technical Services at Diginet Control Systems. Contact details are provided on the back cover of this guide
and also at
www.diginet.net.au
– Electric shock may result in serious injury or death. Follow all warnings in this
RAPIX Lighting Control System - eHub
2