digiO2 ECG-10X Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Equipamiento médico digiO2 ECG-10X. digiO2 ECG-10X 13 páginas. Ecg/ekg recorder
Imprimir páginaTroubleshooting
Problem
Nothing happens when
The batteries are worn
you press the power
out. The batteries are
button
inserted incorrectly.
The electrodes are not
making good contact
with your finger or
chest.
Your body is too tense.
Electrode contact was
broken before 30
seconds of data has
been recorded.
Measurement finishes
The chest electrode has
but result is abnormal.
been applied over
clothing.
Your skin is dry.
The ECG signal is too
weak.
18
Cause
Solution
Replace both batteries
with new ones. Insert the
batteries with their
polarities correctly
aligned.
Check the instructions
and repeat the
measurement.
Relax and repeat the
measurement.
Make sure that your
finger and chest maintain
contact with the
electrodes for the full 30
seconds of the
measurement.
Apply the chest electrode
to bare skin.
Moisten your skin with a
damp towel or wash your
hands in advance, but
don't use the unit in wet
hands.
Make sure that the
electrodes are applied
correctly. However, for
some individuals
measurement may not be
possible.
Warranty Information
Your Cardio Care unit is warranted to be free from defects in materials
and workmanship appearing within 1 year from the date of purchase,
when used in accordance with the instructions provided. The above
warranties extend only to the original retails purchaser.
Manufacture Date
According manufacture date, please see product's CE label SN number,
the SN coding principles are as below.
Product Name: Cardio Care
Model No: ECG-10X
Power: Battery AAAx2 3Vdc
Manufacturer: digiO2 International Co., Ltd.
4F-13, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, Taipei Hsien 221, Taiwan
FCC ID : X58-ECG10X
0120
SN Coding principles：
The first to fourth codes 0009 are the product part number, A9800009,
last four codes.
The fifth to sixth codes "YY" are the last 2 codes of A.D.
The seventh code "M" is month (1~9, Oct=A, Nov=B, Dec=C)
The eighth to ninth code "DD" are manufacture date
The tenth to fourteenth code "XXXXX" are serial number
The fifteenth code "R" is the version of the product (A9800009)
Sings and Symbols：
Type B Equipment
Caution/Warning, Consult accompanying
documents
CE-European Conformity. This device
conforms to the standards for products
sold in the European Economic Area.
Interference may occur in the vicinity of
equipment marked.
S/N:
0009YYMDDXXXXXR
An item that poses no known hazards in
all MR environments.
Consult instruction for use
19