Cisco 3020 - Cisco Catalyst Blade Switch Manual de introducción - Página 4

Navegue en línea o descargue pdf Manual de introducción para Interruptor Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 31 páginas. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
También para Cisco 3020 - Cisco Catalyst Blade Switch: Manual de introducción (37 páginas), Quickspecs (12 páginas), Nota de publicación (41 páginas), Nota de publicación (27 páginas), Nota de publicación (23 páginas), Nota de publicación (21 páginas), Manual de instalación (21 páginas)

Imprimir página
Cisco 3020 - Cisco Catalyst Blade Switch Manual de introducción
Cisco Switch Module Descriptions
These sections describe the switch modules:
• Cisco Catalyst Blade Switch 3120 for HP, page 4
• Cisco Catalyst Blade Switch 3020 for HP, page 6
The switch module is powered from the blade enclosure backplane. The switch module does not have
a fan. The blade enclosure provides temperature management.
The switch module connects internally to the management module through 100BASE-T Ethernet links.
You can manage the switch modules through the HP Onboard Administrator management module on
a management network that is isolated from other switch traffic. You can manage the switch module
through the RS-232 console port that uses an RJ-45 connector in the switch module front-panel. You
can also manage the switch module through any of the external uplink ports.
Cisco Catalyst Blade Switch 3120 for HP
The Cisco Catalyst Blade Switch 3120 for HP is a stackable, 25 to 27 Gigabit Ethernet port, Layer 3
switch module. The number of ports depends on the type of module installed in ports 19 to 22.
See Table 1 for a description of the switch module ports. See the release notes and the software
configuration guide for information about supported Layer 3 features. See the hardware installation
guide for detailed information about stacking the switch.
The Cisco Catalyst Blade Switch 3120 for HP has a 3120G and a 3120X model. Both are
stacking-capable. The initial setup procedure for both models is the same. For more information about
the features of each model, see the hardware installation guide and the software configuration guide
for the switch module.
4