Cisco 3560V2 - Catalyst 48 10/100 Poe Ficha de datos - Página 10
Navegue en línea o descargue pdf Ficha de datos para Interruptor Cisco 3560V2 - Catalyst 48 10/100 Poe. Cisco 3560V2 - Catalyst 48 10/100 Poe 20 páginas. Cisco catalyst 3560v2-24ps: specifications
Imprimir página
Up to 64 aggregate or individual policers are available per Fast Ethernet or Gigabit Ethernet port.
●
Intelligent Power over Ethernet (PoE) Management
The Cisco Catalyst 3560 v2 series PoE models support Cisco IP phones, Aironet WLAN access points, as well as
any IEEE 802.3af compliant end device. These are some of the advanced PoE features available:
Cisco Discovery Protocol version 2 allows the Cisco Catalyst 3560 v2 Series Switch to negotiate a more
●
granular power setting when connecting to a Cisco powered device, such as IP phones or access points, than
what is provided by IEEE classification.
Per Port power consumption command allows customer to specify maximum power setting on an individual
●
port.
Per Port PoE Power Sensing measures actual power being drawn, enabling more intelligent control of
●
powered devices.
The PoE MIB provides proactive visibility into power usage and enables power policing and troubleshooting.
●
Link Layer Discovery Protocol (LLDP and LLDP-MED) adds support for IEEE 802.1AB link layer discovery
●
protocol for interoperability in multivendor networks. Switches exchange speed, duplex, and power settings
with end devices such as IP phones.
Management and Control Features
The Cisco Catalyst 3560 v2 series switches come with an extensive set of management and control features that
include:
Cisco IOS Software CLI support provides a common user interface and command set with all Cisco routers
●
and Cisco Catalyst desktop switches.
Cisco Discovery Protocol version 2 allows the Cisco Catalyst 3560 v2 Series Switch to negotiate a more
●
granular power setting when connecting to a Cisco powered device, such as IP phones or access points, than
what is provided by IEEE classification.
The PoE MIB provides proactive visibility into power usage and allows customers to set different power level
●
thresholds.
Switching Database Manager templates for access, routing, and VLAN deployment scenarios allow the
●
administrator to easily maximize memory allocation to the desired features based on deployment-specific
requirements.
Generic On-Line Diagnostics (GOLD) check the health of hardware components and verifies proper operation
●
of the system data and control plane at run time and boot time.
VLAN trunks can be created from any port, using either standards-based 802.1Q tagging or the Cisco Inter-
●
Switch Link (ISL) VLAN architecture.
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier
●
administration and troubleshooting.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches.
●
Cisco Group Management Protocol server functions help enable a switch to serve as the Cisco Group
●
Management Protocol router for client switches. The IP Services license is required.
IGMPv3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive
●
video traffic to only the requestors.
Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any
●
other switch in the same network.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Data Sheet
Page 10 of 20