Cisco 400 Series Manual de configuración - Página 26
Navegue en línea o descargue pdf Manual de configuración para Interruptor Cisco 400 Series. Cisco 400 Series 40 páginas. Fasthub
10/100 series
También para Cisco 400 Series: Manual de inicio rápido (8 páginas)
Imprimir página
12.
Controller Setup
26
Reboot the Controller.
The initial setup of the controller is shown below.
The setup instructions outlined in this document are for the
configuration shown in the diagram only. Your configuration may
differ, and the appropriate adjustments must be made.
It is not necessary to configure each AP individually. The WLC is
capable of provisioning the APs.
1. From the main menu, click
2. Set the
Ethernet Multicast Mode
address that is currently not being used on your network for the
Multicast Group Address
3. Click the
button.
Apply
4. Click
Save Configuration
VIEW Certified Configuration Guide
.
Controller
to
and enter a multicast IP
Multicast
.
.
PN: 1725-36192-001_H