Cisco 500 Series Manual de inicio rápido - Página 13

Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Cisco 500 Series. Cisco 500 Series 21 páginas. Stackable managed switches
También para Cisco 500 Series: Manual de información de seguridad (42 páginas), Manual (4 páginas), Guía de inicio rápido (13 páginas), Ficha de datos (5 páginas), Manual del usuario (4 páginas), Manual del usuario (6 páginas), Manual del usuario (46 páginas), Manual (40 páginas), Manual de administración (48 páginas), Manual (24 páginas), Solución de problemas y mantenimiento (15 páginas), Manual de consulta rápida (7 páginas), Manual de inicio rápido (25 páginas)

500X Right Side

500 Right Side

RJ-45 Ethernet Ports—Use these ports to connect network devices, such

as computers, printers, and access points, to the switch. Standard Ethernet

ports can not be used to stack the switches.

SFP (if present)—The small form-factor pluggable (SFP) are connection

points for modules, so the switch can link to other switches. These ports

are also commonly referred to as miniGigaBit Interface Converter

(miniGBIC) ports. The term SFP will be used in this guide.

• SFP ports are compatible with Cisco modules MGBSX1, MGBLH1,

MGBLX1, MGBBX1, MFELX1, MFEFX1, and MFEBX1, as well as other

brands of modules.

• Cisco SFP+ optical modules that are supported in the 500X switches

are: SFP-10G-SR, SFP-10G-LRM, and SFP-10G-LR.

• The 500 and 500X switches support the following SFP+ Copper Cable

modules for stacking: SFP-H10GB-CU1M, SFP-H10GB-CU3M, and

SFP-H10GB-CU5M.

• SFP interface is a combination port, shared with one other RJ-45

interface. When the SFP is active, the adjacent RJ-45 port is disabled.

• The LEDs of the shared RJ-45 port light to respond to the SFP interface

traffic.

500 Series Stackable Managed Switches