Cisco 500 Series Manual - Página 18

Navegue en línea o descargue pdf Manual para Interruptor Cisco 500 Series. Cisco 500 Series 40 páginas. Stackable managed switches
También para Cisco 500 Series: Manual de información de seguridad (42 páginas), Manual (4 páginas), Guía de inicio rápido (13 páginas), Manual de inicio rápido (21 páginas), Ficha de datos (5 páginas), Manual del usuario (4 páginas), Manual del usuario (6 páginas), Manual del usuario (46 páginas), Manual de administración (48 páginas), Manual (24 páginas), Solución de problemas y mantenimiento (15 páginas), Manual de consulta rápida (7 páginas), Manual de inicio rápido (25 páginas)

Imprimir página
Cisco 500 Series Manual
Wireless Headsets
Wireless Headsets
You can use most wireless headsets with your phone. For a list of supported wireless headsets, see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html
Refer to your wireless headset documentation for information about connecting the headset and using the
features.
Cisco Headset Configuration on Cisco Unified Communications
Manager
The Cisco Headset 500 Series and Cisco Headset 730 is supported by most Cisco Unified Communications
Manager (Unified CM) releases. But you should install the latest phone firmware release and device packages
before connecting your headset to a phone. When the headset is first connected, it will download the required
firmware and begin the upgrade process.
The following tables list the Unified CM parameters and the phone firmware release that is required for your
Cisco headset to function.
Table 8: Cisco Headset 500 Series Headset Parameters for Cisco IP Phone 7800 Series
Cisco Headset
Cisco Headset
531 and 532
Cisco Headset
561 and 562
Headsets
18
Phone Firmware
Product Specific
Configuration
Parameter
Phone Firmware
Wideband
Release 12.1(1)
Headset
or later
Wideband
Headset UI
Control
Phone Firmware
Wireless
Release
Headset
12.5(1)SR1 or
Hookswitch
later, and the
Control
latest device
Wideband
package
Headset
Wideband
Headset UI
Control
Description
The headset usually requires about 5 seconds to
upgrade.
The headset usually requires 5 to 15 minutes to
upgrade, and the base LEDs light in sequence to show
the upgrade progress. The user can postpone the
upgrade up to 4 times.
If you are using the Y cable to connect the headset
base to the phone, then you must enable Wireless
Headset Hookswitch Control.
Headsets