Cisco 550XG series Manual de inicio rápido - Página 5
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Cisco 550XG series. Cisco 550XG series 17 páginas. 10g stackable managed switches
Imprimir páginaWe strongly recommend using Cat6A or better cable to connect
N
OTE
network devices. When you connect your network devices, do not
exceed the maximum cabling distance of 100 meters (328 feet). It can
take up to one minute for attached devices or the LAN to be operational
after it is connected. This is normal behavior.
Configuring the Cisco 550XG Switches
1 2 4
Before You Begin
The switch can be accessed and managed by two different methods; over
your IP network using the web-based interface, or by using the switch's
command-line interface through the console port. Using the console port
requires advanced user skills.
These are the default settings used when configuring your switch for the
first time.
Parameter
Username
Password
LAN IP
Configuring Your Switch Using the Web-based Interface
To access the switch with a web-based interface, you must know the IP
address that the switch is using. The default configuration of the switch is
to use its factory default IP address of 192.168.1.254 by default.
When the switch is using the factory default IP address, the System LED
flashes continuously. When the switch is using a DHCP server-assigned IP
address or an administrator has configured a static IP address, the System
LED is on solid (DHCP is enabled by default).
If you are managing the switch through a network connection and
N
OTE
the switch IP address is changed, either by a DHCP server or manually,
your access to the switch will be lost. You must enter the new IP address
that the switch is using into your browser to use the web-based
interface. If you are managing the switch through a console port
connection, the link is retained.
Cisco 550XG Series 10G Stackable Switches Quick Start Guide
Default Value
cisco
cisco
192.168.1.254
5