Cisco 9124 - mds multilayer fabric switch Manual de instalación del hardware - Página 21

Navegue en línea o descargue pdf Manual de instalación del hardware para Interruptor Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 36 páginas. Mds 9000 series
También para Cisco 9124 - mds multilayer fabric switch: Especificaciones (2 páginas), Ficha de datos (9 páginas), Especificaciones (3 páginas), Manual de configuración (49 páginas), Nota de publicación (48 páginas), Nota de publicación (44 páginas), Nota de publicación (36 páginas), Nota de publicación (22 páginas), Nota de publicación (3 páginas), Nota de publicación (40 páginas), Manual (16 páginas)

Chapter 2

Installing the Cisco MDS 9100 Series

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Stabilize the switch in the rack by attaching the front rack-mount brackets to the rear rack-mounting

Step 4

rails:

Figure 2-17

If the chassis exceeds the 1-RU space on the low side of the rack, you may have difficulty installing other

Tip

equipment. In this situation, loosen the screws on the front and back rails of the chassis and raise it to

the top of the RU space by pushing the chassis up until it cannot go any further. Then retighten the screws

while keeping the chassis in the elevated position.

Installing Cisco MDS 9134 48-Port and 64-Port Bundles

To install multiple Cisco MDS 9134 Switches to expand up to 48 ports and up to 64 ports, follow these

steps:

Ensure that the boxes that are received each consist of a Cisco MDS 9134 Switch with a 10-Gbps

Step 1

transceiver plugged in and a copper cable.

Install the MDS 9134 Switches by placing one on top of the other (recommended) or side-by-side.

Step 2

OL-21514-01

Insert two screws (12-24 or 10-32, depending on rack type) through the holes in one of the front

rack-mount brackets and into the threaded holes in the back rack-mounting rail (see

For racks with square holes, first install the 12-24 cage nuts.

Attaching the Cisco MDS 9148, Cisco MDS 9134 Switch, or the Cisco MDS 9124 Switch

(Rear-Facing) to the Cabinet

Front cabinet

mounting

rails

Repeat for the front rack-mount bracket on the other side of the switch.

Installing Cisco MDS 9134 48-Port and 64-Port Bundles

Rear cabinet

mounting

rails

Cisco MDS 9100 Series Hardware Installation Guide

Figure

2-17).

2-21