Cisco 9134 - MDS Multilayer Fabric Switch Manual de configuración - Página 45

Navegue en línea o descargue pdf Manual de configuración para Interruptor Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 páginas. Mds 9000 series
También para Cisco 9134 - MDS Multilayer Fabric Switch: Especificaciones (3 páginas), Nota de publicación (48 páginas), Nota de publicación (44 páginas), Nota de publicación (22 páginas), Nota de publicación (3 páginas), Nota de publicación (40 páginas), Notas de publicación (10 páginas), Manual (16 páginas), Manual de instalación del hardware (36 páginas)

Figure 41 Disabling a port

Click Submit

Verifying VLAN settings

After disabling the XConnects, verify that each port used in the iSCSI setup is enabled and is part

of the same VLAN. To verify:

From Windows Start, select Run.

Enter "telnet" in the Run dialog box.

NOTE:

All ports are members of the same VLAN and are in VLAN 1 by default.

Verify the VLAN settings for Interconnects A and B.

Figure 42 Interconnect telnet session

Conﬁguring p-Class Blade GbE2 server enclosure interconnects

This section describes a conﬁguration example using GbE2 interconnects. For details on the conﬁguration

or installation of the interconnects, see the speciﬁc Blade server documentation.

Setup

Using the setup instructions in the HP ProLiant BL p-Class GbE2 Interconnect Switch Application Guide,

enable the Browser-Based Interface (BBI). Access the conﬁguration management and operation features of

the switch through the BBI and your Web browser. Use the web interface to disable the cross connection

(Figure

41).

(Figure

42).

C-Series iSCSI