Cisco Aironet 1000 Series Actualizar - Página 28

Navegue en línea o descargue pdf Actualizar para Interruptor Cisco Aironet 1000 Series. Cisco Aironet 1000 Series 28 páginas. Install and upgrade internal modules and field replaceable units
También para Cisco Aironet 1000 Series: Manual de implantación (40 páginas), Manual (20 páginas)

Imprimir página

Installing a SIM Card on C111X, C1109-2PX, C1109-4P

Figure 12: SIMs Inserted

1. Use a flat screw driver to pry and remove the SIM cover.

2. Install SIM 0 or SIM 1 in their respective slots. SIM location (0 or 1) is marked on both the unit panel

face (visible when the SIM cover is removed). The SIM icons show the correct orientation required to

install the SIM into each respective connector (SIM connectors are a push-push type).

3. To install, insert the SIM card into the connector until you feel it click, and then let go. The SIM is locked

into the connector.

4. To remove the SIM card, depress the SIM in the connector slot until you feel the same click and let it go.

The SIM connector should get ejected part way out of the connector. You can then grab the SIM and

remove it.

5. When SIM cards are installed, replace the SIM-cover and secure using a flat screw-driver.

Note

We recommend that you use industrial-grade SIM cards.

Install and Upgrade Internal Modules and Field Replaceable Units

Micro SIM slots

SIM 0 slot

SIM 1 slot

Orientation notch (SIM 0)

Orientation notch (SIM 1)