Cisco Aironet 350 Series Manual - Página 6

Navegue en línea o descargue pdf Manual para Interruptor Cisco Aironet 350 Series. Cisco Aironet 350 Series 10 páginas. Managed switches
También para Cisco Aironet 350 Series: Manual de inicio rápido (12 páginas), Notas de publicación (14 páginas), Manual de inicio rápido (16 páginas), Manual de inicio rápido (12 páginas), Manual de inicio rápido (12 páginas), Manual de inicio rápido (2 páginas), Conozca (16 páginas), Manual de inicio rápido (5 páginas)

show stack configuration

CBS350-1#

In this example, the Active (Unit 1) switch now uses te3-4 as stack links. These settings will take

effect after the switch reboots.

Step 8 (Optional)

In the Privileged EXEC mode of the switch, save the configured settings to the startup

configuration file, by entering the following:

copy running-config startup-config

CBS350-1#

Step 9 (Optional)

Press Y for Yes or N for No on your keyboard once the Overwrite file [startup-config]... prompt

appears.

Step 10

Reload the switch to apply the configured stack settings by entering the following:

reload

CBS350-1#

Important: When a switch is reloaded, the running configuration file is deleted. Before proceeding

with the reload instructions, make sure to save all the running configuration settings to avoid data

loss.

Step 11

Press Y for Yes or N for No on your keyboard once the Do you want to continue prompt appears.

The Active unit will now reboot. You should now have configured the stack settings of your active

unit.

Configure Stack Settings on the Standby or Member Switch

Step 1

you have configured a new username or password, enter the credentials instead.

The available commands may vary depending on the exact model of your device. In this example,

CBS350-48MP switch is used.The hostname of the Standby switch is CBS350-2.

Step 2

Enter the Global Configuration mode of the switch by entering the following: