BYOC Envelope Filter Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Pedal de música BYOC Envelope Filter. BYOC Envelope Filter 10 páginas.
También para BYOC Envelope Filter: Manual de instrucciones (12 páginas)

Imprimir página

Assembly

1. Install the jacks first. If you are looking down inside the enclosure, the mono jack

goes on the right side and the stereo jack goes on the left. Place the washer on the

outside of the enclosure. Use a 1/2" wrench to tighten.

2. Install the AC adaptor jack. The bolt goes on the inside. Use a 3/4" or 14mm wrench

to tighten.

3. Install the potentiometers so that the solder lugs are pointing down. The washers go

on the outside. Use a 10mm wrench to tighten but only snug. Do not over tighten the

pots.

4. Install the footswitch. The first bolt and metal washer go inside. The plastic washer

and second bolt go on the outside. It does not matter which side you designate as the

"leading edge" of the footswitch as long as you orientate it so that the flat sides of the

solder lugs are aligned in horizontal rows, not vertical columns.