Accustic Arts CD-PLAYER I (MK 3) Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Accustic Arts CD-PLAYER I (MK 3). Accustic Arts CD-PLAYER I (MK 3) 14 páginas.
También para Accustic Arts CD-PLAYER I (MK 3): Manual de instrucciones (10 páginas)

Imprimir página

6 Reproduction of a CD

6.1 Start-up and loading a CD

First of all, please switch on the device by pressing the mains power switch 2 and set the rotary switch

12 to the position OPERATE. The laser unit of the CD player now initialises for approx. 2 seconds and

disc

finds out if a CD is loaded or not. If no CD is inserted, then the display shows

. If there is a CD

in the device, then after initialisation of the laser the number of music tracks and the total time of the CD

65:20

is displayed. Then, for example, on the display shows

This means that the inserted CD has 10 music tracks and the complete total playing time is 65 minutes

and 20 seconds.

If you wish to load a CD or exchange a CD which is already loaded, then first of all slowly push the cover

13 to the back. On the display will now appear

Open

, indicating the cover is open. Now remove the

clamper 14 by lifting it upwards. Please note that the puck has an integrated magnet and therefore sits

rather firmly on the CD. After removing the puck you may now remove a CD. When removing the CD take

care not to touch the laser unit. Finger prints and dirt on the laser unit can disturb the scanning process

and so negatively affect the sound.

Insert the desired CD and now place the clamper 14 in the middle of the CD. Make sure that the puck

locks correctly into position, otherwise playback is not possible. Close the cover 13 completely again.

After the closing process the laser initialises again, i.e. it scans the inserted CD and determines the

number of music tracks as well as the total time. If no CD is loaded or the clamper 14 is not correctly

disc

fixed on to the CD, the display shows

6.2 Basic functions of the CD-PLAYER I (MK 3)

After the CD has been correctly inserted the device is now ready for operation and you can start the CD

by shortly pressing the pushbutton PLAY.

To stop the CD please press the pushbutton STOP.

To jump or go to the next track please use the left rotary switch SKIP by shortly turning it clockwise and

then release. Should you wish to jump back one or several tracks, turn the rotary switch once or several

times shortly to the left (anti-clockwise).

Should you wish to interrupt your music listening for a short time (e.g. a number of minutes or a just for a

few hours), operate the right rotary switch 12 and turn it left to the STANDBY position. In the standby

function now only the blue standby LED 10 is lit. The lighting for the upper logo and the display goes out.

For a complete start-up of the player, set the rotary switch 12 again to the position OPERATE.

IMPORTANT SAFETY PRECAUTIONS:

If you wish to discontinue your music listening for a longer period (more than 1 hour) the device

must be completely disconnected from the mains power and this is done by pressing the mains

power switch 2.

The functions SKIP, STOP and PLAY can also be operated using the IR remote control. The functions

STANDBY and OPERATE are not available via the remote control.