DigiSender ZX 7 DG45RX Manual - Página 2
Navegue en línea o descargue pdf Manual para Receptor DigiSender ZX 7 DG45RX. DigiSender ZX 7 DG45RX 4 páginas. Additional receiver
Imprimir páginaDG45RX - DigiSender ZX7 Additional Receiver
Installing your DigiSender® ZX7 Additional Receiver
The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV.
1.
Locate a vacant SCART socket on the back of your
receiving TV and insert the DigiSender® SCART
cable.
3.
Connect the Power Supply Unit (PSU) to the socket
labelled 'PSU' on the Receiver.
3.
4.
Ensure that the Audio/Video and Remote Relay
Obis aut et pe nisin pre nonectius ipis ipicit eum
Channel switches on the back of the Receiver are
dem nos net etur modipissi alit in eumet ipsunto te
set to 1 (or whatever Channels you have the Trans-
nobitatur sunt, et, sandae ratur sincimus.
mitter set to).
4.
Connect the Power Supply Unit (PSU) to an avail-
able mains socket.
Please read the instructions carefully prior to installation