Cisco Catalyst 2960-X Manual de instalación del hardware - Página 14
Navegue en línea o descargue pdf Manual de instalación del hardware para Interruptor Cisco Catalyst 2960-X. Cisco Catalyst 2960-X 34 páginas.
También para Cisco Catalyst 2960-X: Manual de introducción (25 páginas), Manual de hardware (20 páginas)
Imprimir página
Rack-Mounting
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
Warning
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Statement 1006
This figure shows the standard 19-inch brackets and other optional mounting brackets. You can order the
optional brackets from your Cisco sales representative.
Figure 11: Rack-Mounting Brackets
1
19-inch brackets
2
ETSI brackets
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
14
3
23-inch brackets
4
24-inch brackets
Switch Installation
OL-28309-02