Cisco Catalyst 3040 Manual de introducción - Página 9
Navegue en línea o descargue pdf Manual de introducción para Interruptor Cisco Catalyst 3040. Cisco Catalyst 3040 37 páginas. Catalyst blade switch for fsc
Imprimir páginaInstalling the Blade Switch in the BX600 System
Follow these steps to install the blade switch in the BX600 system:
Step 1
Obtain and make note of this information from your system administrator before you begin
the blade switch installation:
– Switch IP address
– Subnet mask (IP netmask)
– Default gateway (router)
– Enable secret password (encrypted)
– Enable password (not encrypted)
– Telnet password
– SNMP community strings (optional)
Touch the blade switch static-protective package to unpainted metal on the BX600 system for
Step 2
at least 2 seconds.
Remove any dummy blade from the slot.
Step 3
Keep dummy blades for future use. If you remove the blade switch and do not replace it
Caution
with another one, you must reinstall a dummy blade in that slot.
Step 4
Remove the blade switch from its static-protective package.
Select the I/O slot in which to install the blade switch. Follow the installation requirements
Step 5
listed in the "BX600 System Architecture" section on page 5.
9