Cisco Catalyst 3110X Manual de introducción - Página 2

Navegue en línea o descargue pdf Manual de introducción para Interruptor Cisco Catalyst 3110X. Cisco Catalyst 3110X 31 páginas. Catalyst switch module for ibm bladecenter
También para Cisco Catalyst 3110X: Manual de instalación del hardware (48 páginas)

Imprimir página

Cisco Catalyst 3110X Manual de introducción

About This Guide

This guide provides instructions on how to install and manage your Cisco Catalyst Switch

Module 3110G, 3110X, and 3012 for IBM BladeCenter—referred to as the switch module—in the

IBM BladeCenter enclosure and how to set up and configure your switch module. The IBM

BladeCenter— referred to as the blade enclosure—supports up to four Ethernet switch modules, which

are installed in the interconnect bays of the blade enclosure.

For additional installation and configuration information about the switch module, see the switch

module documentation on Cisco.com at:

http://www.cisco.com/en/US/products/ps8741/tsd_products_support_series_home.html

For blade enclosure compatibility, system requirements, important notes, limitations, open and

resolved caveats, and last-minute documentation updates about the switch module, see the release

notes, also on Cisco.com. When you use the online publications, refer to the documents that match the

Cisco IOS software version that is running on the switch module.

For details on the number and location of blade enclosure bays and for additional information on the

blade enclosure, see the BladeCenter Installation and User's Guide at:

http://www-03.ibm.com/systems/bladecenter/

Important: Be sure to read the multilingual safety instructions on the CD that came with your IBM

BladeCenter enclosure before you use this product.

Before you continue with the installation, also read the release notes for the blade enclosure that are

available on the IBM support website.

For translations of the warnings that appear in this publication and all safety and handling warnings

for this product, see the Regulatory Compliance and Safety Information for the Cisco Catalyst Switch

Module 3110G, 3110X, and 3012 for IBM BladeCenter on the documentation CD that ships with the

switch module. For warranty information about the switch module, see the Hardware Warranty Terms

for the Cisco Catalyst Switch Module 3110G, 3110X, and 3012 for IBM BladeCenter, also on the

documentation CD.

Taking Out What You Need

Follow these steps:

1. Unpack and remove the switch module and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

3. Verify that you have received the items shown on page 3. If any item is missing or damaged,

contact your supplier for instructions.