FIBARO FGBHS-213 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Interruptor FIBARO FGBHS-213. FIBARO FGBHS-213 13 páginas. Single switch
También para FIBARO FGBHS-213: Manual (9 páginas)
Imprimir página
10
i
NOTE
Status
fault
values
may be combined, e.g.
1+2=3 means over-
heat and overload oc-
cured.
!
WARNING!
Danger
of
electro-
cution, take precau-
tions to avoid electric
shock!
FunCTIOnAlITY
Malfunction detection:
The Single Switch detects some malfunctions and reports them to
your iOS device.
Every malfunction is sent using Status Fault with code assigned to
every event:
1 – overheat - device detected excessive heat and will turn off
2 – overload - device detected excessive electrical current and will
turn off
3 – overheating and overload - device detected excessive heat and
excessive electrical current, device will turn off
4 – relay contacts sticked - control over device relays is lost
8 – no communication with power metering module, device will
turn off
Maintenance load controlling:
The Single Switch can turn on and off connected loads even if is not
paired or connected to an external switch (e.g. to test its operation).
To change state of the device to opposite one:
1. Open the cover.
2. Press and hold the button.
Button
3. Wait for the lED indicator to glow white.
4. Release the button.
5. Click the button to confirm.
6. As long as lED is lit, clicking button will turn on/off the connected
device.
7. Maintenance control will be disabled after 5 seconds of inactivity.
Device identification:
The Single Switch can identify itself if your are not sure which device
you are currently controlling. When you ask the device to identify it-
self via HomeKit-compatible app it will:
•
triple blink blue 3 times with the build-in lED,
•
change
state
approx.
5
seconds
network).
B
of
the
device
(only
if
to
opposite
one
paired
with
HomeKit
for