Digisol DG-CS4554F Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Digisol DG-CS4554F. Digisol DG-CS4554F 2 páginas. 54-port 10g top-of-rack switch
Imprimir página6. Perform System Boot
Power ON the Switch
7. Connect Network Cables
1
For the RJ-45 Management port, connect 100-ohm
Category 5, 5e or better twisted-pair cable.
2
Connect DAC cables to the SFP+/QSFP+ slots. Or first
install SFP+/QSFP+ transceivers and then connect fiber
optic cabling to the transceiver ports.
The following transceivers are supported:
◆
40GBASE-CR4
◆
40GBASE-SR4
◆
10GBASE-CR
◆
10GBASE-SR
◆
1000BASE-SX
◆
1000BASE-LX
Note:
As connections are made, check the port status
LEDs to be sure the links are valid.
1
2
Hardware Specifications
Switch Chassis
Size (WxDxH) 438.4 x 473 x 43.4 mm (17.26 x 18.62 x 1.71
inches) Weight 8.87 kg (19.56 lb), with two installed PSUs
Temperature
Operating: 0° C to 40° C (32° F to 104° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity
Operating: 5% to 95% (non-condensing)
Power
282 Watts maximum
Consumption
AC PSU
Power Rating 100–240 VAC, 50-60 Hz, 400 Watts, hot
pluggable AC Input
DC Output
5 VDC @ 3 A
12 VDC @ 33 A
DC PSU
Power Rating 48 VDC, 400 Watts, hot
pluggable DC Input
maximum
DC Output
5 VDC @ 0.5 A
12 VDC @ 33 A
– 2 –
Quick Start Guide
100–240 VAC, 50-60 Hz, 6–3 A
36–75 VDC, 16 A