FIBARO Home Center HCL Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Domótica FIBARO Home Center HCL. FIBARO Home Center HCL 20 páginas.

1 Installation

Install the Home Center as described in the printed manual.

Start Home Center by the POWER button on the back and wait approx. 2 minutes to boot.

When the Home Center is correctly installed and fully booted, three LEDs will light up. This means

POWER, NETWORK AND INTERNET (from right to left). like the picture below:

HC2 correct boot LEDs:

HCL correct boot LEDs:

In case the LEDs are not the same as the picture, please refer to Appendix B - Booting with only

two LEDs.

IMPORTANT: The installation may not be continued before having the correct three LEDs.