Digisol DG-SC2600W Manual de instalación rápida - Página 8

Navegue en línea o descargue pdf Manual de instalación rápida para Cámara IP Digisol DG-SC2600W. Digisol DG-SC2600W 17 páginas. Skyros series ip surveillance camera
También para Digisol DG-SC2600W: Manual de instalación (10 páginas)

Imprimir página

Camera Installation – Hardware

Please follow the instructions mentioned below to set up your IP camera.

1. Unpack the product package and check if anything's missing.

2. Connect the Ethernet cable to your local area network, and connect the

other end to the LAN jack of this IP camera.

NOTE: You can skip this step if you plan to use wireless LAN only.

3. Plug the power adapter to the wall socket, and connect the power

connector to the power jack located at the bottom of the IP camera.

4. For the wireless version, connect the antenna to the antenna bases, which

is located at the top of this IP camera.

5. Place the camera at a secure place, and point the camera to the place you

wish to monitor. If you wish to hang the camera on the ceiling or wall,

please use the tripod connector.

6. Launch Internet Explorer on your computer, and follow the instructions

given in the next section to set the IP camera.