Sharp AX1200S - 22" SuperSteam Oven Manual de instrucciones - Página 40

Navegue en línea o descargue pdf Manual de instrucciones para Horno microondas Sharp AX1200S - 22" SuperSteam Oven. Sharp AX1200S - 22" SuperSteam Oven 43 páginas. Supersteam oven
También para Sharp AX1200S - 22" SuperSteam Oven: Manual de instrucciones (43 páginas), Manual de instrucciones de instalación (8 páginas), Especificaciones (2 páginas)

Sharp AX1200S - 22
T R O U B L E S H O O T I N G C H A R T
If EE is displayed or you think the oven is not working properly, check the chart below before consulting a Sharp
Authorized Servicer. This will help to prevent unnecessary service calls.

TROUBLESHOOTING CHART

ERROR MESSAGE / INFORMATION MESSAGE
MESSAGE ON DISPLAY
ERROR
EE
MESSAGE
Please refer to instructions in
operation manual.
SENSOR
Finish cooking by manual
ERROR
time.
Press Stop/Clear.
INFORMATION
Wait.
MESSAGE
Oven is too warm to use.
Water is frozen.
Please refer to instructions in
operation manual.
Now cooling.
Replace drip tray
Remove and empty the drip
tray.
Replace.
Descaling is necessary.
Fill water reservoir.
Hot
SEC AX1200 O/M,P36-
Due to technical error, call service for your nearest Sharp
Authorized Servicer.
The sensor does not detect vapor properly in microwave
sensor mode. Press Stop/Clear and finish cooking using
manual time.
The oven is too hot to use Microwave Defrost or Steam Proof.
Remove food from oven and allow to cool until the message
clears.
The oven may not operate properly.
Operate the oven with Convection Broil without food and
preheat for XX minutes.
See page 29.
After cooking, the oven and the parts will be hot.
Now cooling is shown in the display until the oven cavity
has cooled. The cooling fan may remain on up to 13 minutes.
Now cooling will disappear when the oven has cooled.
If you wish to use the warm oven, simply press Stop/Clear.
Remove and replace the drip tray correctly.
See page 13.
In case the drip tray is not installed correctly, Replace drip
tray will be shown in the display.
Empty drip tray and replace will be shown in the display
when water remains in the drip tray. You must empty the drip
tray and replace it before SuperSteam Convection or Steam
Cooking will start. See page 13.
Follow step-by-step instructions for decaling.
See page 14.
Remove reservoir and fill with water to the MAX mark.
Replace and push firmly into place.
Press START.
The oven cabinet and oven cavity are very hot.
Pay extra attention not to burn yourself.
38
ACTION
38
08.9.24, 1:56 PM