Sharp Aquos LC-26A37M Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para TV LCD Sharp Aquos LC-26A37M. Sharp Aquos LC-26A37M 8 páginas. Lcd colour television
Imprimir página
Setup menu (Continued)
4
Press a/b to select "Change Password", and
then press ENTER.
5
Enter the 4-digit number as a Password using
0 — 9.
Enter your new password. Use 4 digits.
Change Password
4
Reset
–
– – –
New Password
Reconfirm
– – – –
6
Enter the same 4-digit number as in step 5 to
confi rm.
NOTE
• To view a locked channel (Lock setting in Programme Setup
"Manual Adjust" is set to "On"), you must enter a Password.
When you select a locked channel, a Password prompt
message pops up.
• Press ENTER to display the Password input window.
Resetting the Password
Allow you to reset your password.
1
Repeat steps 1 to 3 in Setting a Password.
2
Press a/b to select "Reset", and then press
ENTER.
3
Press c/d to select "Yes", and then press
ENTER.
H Position
For adjusting a picture's horizontal and vertical
position.
Selected item
Description
H-Pos.
Centres the image by moving it to the left
or right.
V-Pos.
Centres the image by moving it up or
down.
H WSS
WSS allows a television to switch automatically
among the different screen formats.
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
• Not available for COMPONENT signal.
H 4:3 Mode
The WSS signal has 4:3 auto-switching that allows
you to select between Panorama and Normal.
Selected item
Description
Panorama
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
WSS signal 4:3 screen
4:3 mode "Panorama"
4:3 mode "Normal"
H Output Volume Select
Allows you to select what controls the audio output.
Selected item
Description
Fixed
• Sound via speakers is adjusted with
VOL k/l on the remote control unit
or the TV.
• Sound via the OUTPUT terminal is not
adjustable and constantly outputs.
Variable
• Sound via the OUTPUT terminal
is adjusted with VOL k/l on the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• The "Audio" menu cannot be operated when "Variable" is
selected.
H Language
You can also select a language from setup menu.
Select from among 4 languages: English, Simplifi ed
Chinese, Traditional Chinese and Arabic.
H Input Label
You can assign each input source a label as you
prefer.
1
Press TV/VIDEO to select the desired input
source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then
press ENTER.
5
Press a/b/c/d to select each character of
the new name for the input source, and then
press ENTER.
6
Repeat until the name is fully spelt out.
• The name can be 6 characters or less.
• When you want to set an input source name of less
than 6 characters, select "END", then press ENTER
to exit from the labelling menu.
NOTE
• You cannot change labels if the input source is TV.
Setup menu (Continued)
H HDMI Setup (HDMI input mode only)
1
Repeat steps 1 to 3 in Input Label.
2
Press a/b to select "HDMI Setup", and then
press ENTER.
3
Press a/b to select the desired menu, and
then press ENTER.
4
Press a/b or c/d to select the desired item.
Press ENTER if necessary.
HDMI Setup
items
Signal Type*
Select the video signal type from the
HDMI terminal.
Colour Matrix*
Select the internal colour space
conversion method when an RGB
signal is input.
Dynamic
Select the signal amplitude range.
Range*
Usually, select "Normal".
Auto View
Set whether or not to use WIDE MODE
based on signal recognition, including
an HDMI signal.
Audio Select
Select "Digital" for audio signal via the
HDMI terminal. Select "Analogue" for
audio signal via the AUDIO jack.
NOTE
• Items marked * may be greyed out (with 4) depending on
the type of signal input from the external equipment.
H Input Signal (PC input mode only)
• Some input signals may have to be registered
manually to display properly.
• The pairs of input signals (resolutions) in the list
below are not distinguishable when received.
In such case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
1024 g 768
1280 g 768
Option menu
MENU [Option]
Setup
Option
Audio Only
DNR
Colour System
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select the desired menu, and
then press ENTER.
4
Press a/b or c/d to select the desired item.
Press ENTER if necessary.
11
12
H Audio Only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".
H DNR (Digital Noise Reduction)
Reduce noise on the screen and produces a clearer
Description
video image. (Off, High, Low)
H Colour System
You can change the colour system to one that is
compatible with the image on the screen. (AUTO,
PAL, SECAM, NTSC3.58, NTSC4.43, PAL-60)
NOTE
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC4.43).
• "Colour System" is selectable only when inputting an
S-VIDEO or composite signal.
Picture and still image
You can freeze a motion picture on the Display.
1
Press FREEZE.
• A still image displays.
• The still image is one frame captured from a moving
image at the moment you press FREEZE.
2
Press FREEZE again to exit still image.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn't function for HDMI/COMPONENT input
(1080i/720p resolution) and PC input (all resolution). "No
still image display available" message will appear.
1360 g 768
Wide Mode
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
1
Press WIDE.
• The WIDE MODE menu displays.
[Low ]
• The menu lists the wide mode options selectable for
[AUTO ]
the type of video signal currently received.
2
Press WIDE or a/b while the WIDE MODE
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Auto Selection
If you set "WSS" and "4:3 Mode" in the Setup
menu on page 11, the optimum WIDE mode is
automatically chosen for every broadcast containing
the WSS information.
Description