Sharp Aquos LC-32B20E Manual de instrucciones - Página 29
Navegue en línea o descargue pdf Manual de instrucciones para TV LCD Sharp Aquos LC-32B20E. Sharp Aquos LC-32B20E 44 páginas. Aquos lcd colour television
Imprimir página
Basic adjustment
analogue channel settings
Setup
programme Setup
analogue setting
You can reconfigure Analogue TV channels settings
automatically or manually.
additional search
E
Use this menu to add new channels automatically after
auto installation has been made.
• Start searching channels after selecting colour system and
sound system.
manual adjust
E
Use this menu to set up analogue TV channels
manually.
After selecting "Yes" on the screen, press a/b/
c/d to select the channel you want to set and
the press oK.
Fine
You can adjust the frequency to the desired position.
note
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 - 9.
eXample
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s oK.
Colour sys.
Select the optimum colour system to receive. (Auto,
PAL, SECAM)
Sound sys. (Broadcasting systems)
Select the optimum sound systems (Broadcasting systems)
to receive. (B/G, D/K, I, L/L')
label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel names.
1
Press a/b/c/d to select each character of
the new name for the channel, and then press
oK.
2
Repeat step 1 above until the name is fully spelt
out.
note
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select "END" to
set the channel name.
Skip
Channels with "Skip" set to "On" are passed over when using
pr/ps even if selected while watching the image from the
TV.
Decoder
When connecting a decoder to the unit, you need to select
EXT1 or EXT2.
note
• "Off" is factory preset value.
lock
You can block the viewing of any channel.
note
• See "Child Lock" for setting a PIN.
• When Lock is set to "On" for a channel, "Child lock has
been activated." displays, and the image and sound of the
channel are blocked.
• When pressing 6 while "Child lock has been activated."
displays, the PIN input menu will display. Inputting the
correct PIN lifts the child lock temporarily until the power is
turned off.
Sort
E
Channel positions can be sorted freely.
1
Press c/d to select "Yes", and then press oK.
2
Press a/b/c/d to select the channel you
want to move, and then press oK.
3
Press a/b/c/d to move it to the desired
position, and then press oK.
4
Repeat steps 3 and 4 until all desired channels
are sorted.
erase programme
E
An individual programme can be erased.
1
Press c/d to select "Yes", and then press oK.
2
Press a/b/c/d to select the channel you
want to erase, and then press oK.
• A message screen pops up.
3
Press c/d to select "Yes", and then press
oK to erase the selected programme. All the
subsequent programmes move up.
4
Repeat steps 3 and 4 until all desired channels
are erased.