Sharp CD-BA2100 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sharp CD-BA2100. Sharp CD-BA2100 18 páginas. Sharp mini component system operation manual cd-ba2100
También para Sharp CD-BA2100: Manual rápido (2 páginas)

Imprimir página

(Continued)

(Main unit operation)

2 "AA" size batteries (UM/SUM-3, R6, HP-7 or

similar)

Batteries are not included.

8" - 20'

(0.2 m - 6 m)

Demo mode

When the AC power cord is first connected, the unit will enter

the demonstration mode.

To cancel the demonstration mode:

When the unit is in the stand-by mode (demonstration mode),

press the X-BASS/DEMO button.

The demonstration mode will be canceled and the unit will be

in the low power consumption mode.

To return to the demonstration mode:

When the unit is in the stand-by mode, press the X-BASS/DEMO

button again.

Notes:

When the unit is in the low power consumption mode, the

display will disappear.

When the power is on, the X-BASS/DEMO button can be used

to select the extra bass mode.

To change the brightness of the display

Press the DIMMER button.

The display will be made dimmer.

To return to the original brightness:

Press the DIMMER button again.

When bright

When dark

Remote control

When inserting or removing the batteries, push them toward

the

Installing the batteries incorrectly may cause the unit to mal-

function.

Precautions for battery use:

Insert the batteries according to the direction indicated in the

battery compartment.

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if they are weak or if the unit will not be

used for long periods of time. This will prevent potential

damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Notes concerning use:

Replace the batteries if the operating distance is reduced or if

the operation becomes erratic.

Periodically clean the transmitter LED on the remote control

and the sensor on the main unit with a soft cloth.

Exposing the sensor on the main unit to strong light may in-

terfere with operation. Change the lighting or the direction of

the unit.

Keep the remote control away from moisture, excessive heat,

shock, and vibrations.

battery terminals.