Sharp CD-E800W Manual de instrucciones - Página 27

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sharp CD-E800W. Sharp CD-E800W 36 páginas. Mini component system

Press the TUNING/TIME (

) button to specify the hour

to start, then press the MEMORY/SET button.

The illustrations show the timer playback setting.

Press the TUNING/TIME (

) button to specify the min-

utes, then press the MEMORY/SET button.

The unit will enter the timer stand-by mode automatically.

To cancel the timer playback/timer recording:

Press the ON/STAND-BY button to turn the power on.

When the preset time is reached, playback or recording will

start.

The volume will increase gradually until it reaches the volume

you were listening to before your system entered the timer

stand-by mode.

In timer playback:

If you select CD or TAPE, the unit will enter the stand-by mode

after the playback. If you select TUNER, it will enter the stand-

by mode one hour after the timer playback starts.

In timer recording:

When the recording tape reaches its end, the timer recording

will end, and the unit will enter the stand-by mode.

To reset or change the timer setting:

Perform "Timer playback or timer recording" from the beginning.

Note:

When performing timer playback or recording using another unit

connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in

step 2.

At this time, only this unit will be turned on or enter the power stand-

by mode automatically. It will enter the power stand-by mode when

the end of the recording tape is reached in timer recording or 1 hour

after the playback starts in timer playback. However, another unit

will not be turned on or off.

03/8/27

CD-E800W(A)3.fm

CD-E800W

TINSE0908AWZZ