Sharp CD180 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sharp CD180. Sharp CD180 13 páginas. Portable cd stereo system
Imprimir página
Recording to a Cassette Tape
Before recording:
G When recording important selections, make a preliminary test to en-
sure that the desired material is properly recorded.
G SHARP is not liable for damage or loss of your recording arising from
malfunction of this unit.
G The ALC (Automatic Record Level Control) circuit automatically con-
trols the level of the input signal used for recording.
G The VOLUME control may be adjusted with no effect on the recorded
signal. (Variable Sound Monitor)
G Metal and CrO
tapes cannot be used for recording.
2
8
I Recording from a CD
1
Set the FUNCTION switch to CD.
2
Load the disc to be recorded.
3
Load a blank cassette into the cassette compartment with the
side to be recorded facing toward you.
4
Press the RECORD G button.
5
Press the PLAY/PAUSE 0 6
0 6 button on the CD.
0 6
0 6
0 6
To stop recording:
Press the STOP/EJECT I 7 button.
If the STOP I or PLAY/PAUSE 0 6 button is pressed while recording,
or if the CD comes to its end, the tape deck will not stop.
To record a specific track:
Press the REVIEW/DOWN 5 or CUE/UP 4 button until the desired
track number is displayed, then start recording.
I Recording from the radio
1
Set the FUNCTION switch to FM or AM.
2
Tune in to the station to be recorded.
3
Load a blank cassette into the cassette compartment with the
side to be recorded facing toward you.
4
Press the PAUSE 6 6 6 6 6 button.
5
Press the RECORD G button.
6
Press the PAUSE 6 6 6 6 6 button again.
To stop recording:
Press the STOP/EJECT I 7 button.
I Erasing a recorded tape
1
Set the FUNCTION switch to TAPE.
2
Load a tape into the cassette compartment with the side to be
erased facing toward you.
3
Press the RECORD G button.