Sharp XL-MP333H Manual de instrucciones - Página 17

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sharp XL-MP333H. Sharp XL-MP333H 49 páginas. Micro component system

Imprimir página

Caution:

! Use speakers with an impedance of 6 ohms or more, as lower im-

pedance speakers can damage the unit.

! Do not mistake the right and the left chan-

nels. The right speaker is the one on the right

side when you face the unit.

! Do not let the bare speaker wires touch

each other.

! Do not allow any objects to fall into or to be

placed in the bass reflex ducts.

! Do not stand or sit on the speakers. You may

be injured.

Notes:

! The speakers are magnetically shielded.

Therefore, they do not affect the display even you use them near

the TV. However, some colour variation may occur, depending on

the type of TV used.

If colour variation occurs...

Turn off the TV (from the power switch).

After 15 - 30 minutes, turn the TV on again.

If the colour variation is still present...

Move the speakers further away from the TV.

! If any kind of magnet or an electromagnet is placed too close to the

TV and the system, irregular colours may appear on the TV screen.

" Cooling fan (XL-MP444H only)

This product is equipped with a cooling

fan inside for better heat radiation.

" Connecting the AC power lead

After checking all the connections have been made correctly, con-

nect the AC power lead to the AC power input socket, then plug the

AC power lead of this unit into the wall socket. If you plug in the unit

first, the unit will enter the demonstration mode.

Wall socket

(AC 230 V, 50 Hz)

Incorrect

Notes:

! Never use a power lead other than the one supplied. Otherwise, a

malfunction or an accident may occur.

! Unplug the AC power lead from the wall socket if the unit will not

be in use for a prolonged period of time.

" Demonstration mode

When you plug the unit in for the first time,

the unit will enter the demonstration

mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-

by mode (demonstration mode),

press the X-BASS/DEMO button.

The unit will enter the low power

consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/

DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to se-

lect the extra bass mode.

04/5/26

XL-MP333H_MP444H_E.fm

XL-MP333H

XL-MP444H

ENGLISH

E-10

TINSZA022SJZZ