Sharp AR-5420 Manual de instrucciones - Página 15

Navegue en línea o descargue pdf Manual de instrucciones para Impresora todo en uno Sharp AR-5420. Sharp AR-5420 44 páginas. Digital laser copier

Set the paper guides to the paper width. Insert the paper (print

face down) all the way into the multi-bypass tray.

• Paper must be fed narrow side into the feed slot.

• Special papers such as transparency film, labels, and envelopes

must be fed one sheet at a time through the multi-bypass tray.

• When copying onto transparency film, remove each copy

promptly. Do not let copies stack up. When loading an

envelope, make sure that it is straight and flat.

Press the tray select (

Note for loading envelopes

• Envelopes must be fed narrow side into the feed slot at a time.

• Do not use non-standard envelopes, and envelopes that have metal clasps, plastic

snappers, string closures, windows, linings, self-adhesive, patches or synthetic

materials. Do not use envelopes that are filled with air or envelopes that have

labels or stamps attached.

• Envelopes of which the surface is not flat because of embossing may cause the

copies/prints to become smudged.

• Under high humidity and temperature conditions the glue flaps on some envelopes

may become sticky and be sealed when copied.

• Use only envelopes which are flat and crisply folded. Curled or poorly formed

envelopes may cause misfeeds.

• It is recommended that you perform a test print before performing the actual copy

job.

Note for loading thick paper

Copying on thick paper requires higher fusing temperature setting. Set the user

program 29 to "2 (High)" when using thick paper. (See page 20 and 21.)

) key to select the multi-bypass tray.

Print face