Sharp AR-800 imager Manual de servicio - Página 8

Navegue en línea o descargue pdf Manual de servicio para Impresora todo en uno Sharp AR-800 imager. Sharp AR-800 imager 25 páginas. Digital copier
También para Sharp AR-800 imager: Folleto y especificaciones (8 páginas)

Sharp AR-800 imager Manual de servicio
E. Paper feed
Paper feed means
Capacity
Manual feed start
Priority feed means
Manual
feed
size
specification
F. Continuous copy
No. of sheets
Input system
Count system
G. Density adjustment
Auto density adjustment
Manual density adjustment
Priority mode
H. Picture quality mode
Picture process mode
Priority mode
I. Magnification ratio
(1) Reduction and enlargement
Reduction and enlargement
SPECIFICATIONS
LCF
Cassettes: 3 steps (Drawers of the copier)
SFB
LCF: 4,000 sheets (Load height: max. 415mm)
Cassette: 500 sheets (Load height: max. 55mm)
SFB: 100 sheets (Load height: max. 11mm)
Note 1: 50 sheets for SFB duplex copy.
Note 2: However, the cassette load height is displayed as
53mm.
Note 3: however, the SFB load height is displayed as 10mm.
Start key start
LCF priority
Note 1: By data input of the adjustment mode, another paper
feed means can have priority to be selected.
After setting paper, press the paper size key to specify the
paper size.
Note 1: By specifying the paper size, the binding margin,
duplex edge erase, and continuous page copy can be
performed. For APS and AMS, invalid.
Available
11-step adjustment (Operated with
keys on the control panel LCD)
Auto density adjustment
Note 1: By data input of the adjustment
mode, selection of auto/manual is
allowed.
Standard/Photo/Text mode
Standard mode
Note: By data input of the adjustment mode, the mode can be selected.
Increment of 1 sheet up to max. 999 sheets
10-key input
Reduction system
Note 1: "1"is displayed in auto clear and warming up.
Factory setup: Auto
Auto setup system depends on selecting the original
size and paper size.
Note 1: A desired fixed-size series (including a different
series) can be selected: Japan A5, UNIVERSAL,
OTHER.
1 - 4
Factory
setup:
LCF
priority