Default settings
The default settings are used to set specific print conditions for printing in an environment where the print driver is
not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
NOTE
When some items can be set both in the printer driver and on the operation panel, the values set in the printer driver
override those set on the operation panel. For items that can be set in the printer driver, perform the settings in the
printer driver.
The following settings are available:
I I I I Copies
COPIES sets the number of print to make.
Default setting: 1
The number of copies can be set from 1 to 999.
I I I I Orientation
ORIENTATION allows portrait orientation or
landscape orientation to be selected for printing.
Default setting: PORTRAIT
PORTRAIT or LANDSCAPE can be set.
I I I I Default paper size
The paper size to be used for printing under normal
conditions is set.
Printing will be performed on the specified size of
paper unless otherwise specified.
Default setting: A4 or 8-1/2X11
A3W, A3, B4, A4, B5, A5, 12X18, 11X17, 8-1/2X14,
8-1/2X13, 8-1/2X11, 7-1/4X10-1/2 or 5-1/2X8-1/2
can be set.
I I I I Default output tray
The output tray to be used for printing under normal
conditions is set. Printed sheets will be output to
the specified tray unless otherwise specified by
application software.
Default setting: CENTRE TRAY
The trays that can be selected depend on
installation of peripheral devices.
I I I I Default paper type
The paper type to be used for printing under normal
conditions is set. Printing will be performed on the
specified type of paper unless otherwise specified.
Default setting: PLAIN
PLAIN, PRE-PRINTED, RECYCLED, LETTER
HEAD, PRE-PUNCHED or COLOUR can be set.
TABLE OF CONTENTS
BEGINNING OF CHAPTER
MAKING CONFIGURATION SETTING
4-3
Imprimir página