KEY OPERATOR PROGRAMS
Initial resolution setting
This is used to change the default resolution
setting for transmission in network scanner mode.
The default resolution is initially set to "LOWER".
To change the setting, touch the desired resolution
key.
G [LOWEST]
(B/W: 150 x 150dpi, Colour: 100 x 100dpi)
G [LOWER]
(B/W: 200 x 200dpi, Colour: 150 x 150dpi)
G [STANDARD]
(B/W: 300 x 300dpi, Colour: 200 x 200dpi)
G [HIGHER]
(B/W: 400 x 400dpi, Colour: 300 x 300dpi)
G [HIGHEST]
(B/W: 600 x 600dpi, Colour: 600 x 600dpi)
Scan complete sound setting
This program is used to set the volume of the beep
sound that informs you that the original has been
scanned. Two volume levels are available, or the
beep can be turned off.
Default sender set
If you do not select a sender when performing a
Scan to E-mail operation, the sender information
stored with this setting is automatically used. You
can check the stored sender information by printing
the SENDER list.
1
Touch the [SENDER NAME] key and then
enter the sender name.
The sender name entry screen appears
Up to 20 characters can be entered.
2
Touch the [OK] key.
3
Touch the [RE.ADDRESS] key and then
enter the return address.
Up to 64 characters can be entered.
4
Touch the [OK] key.
The entered return address appears. Check the
address to make sure it is correct.
Compression mode at broadcasting
This setting selects the compression mode for
broadcasting
using
compression mode set here is used for all
destinations
regardless
compression mode settings.
The initial settings are as follows:
G Black and white scanning: HIGH (G4)
G Colour scanning: MEDIUM
Scan
to
E-mail.
The
of
their
individual
TABLE OF CONTENTS
Initial file format setting
These programs are used to set the file format of
the transmitted image and the number of images
per file.
G The file type and compression mode is set in
"FILE FORMAT (FILE TYPE / COMPRESSION
MODE)". The setting takes effect in the following
situations:
• A file format is not selected when sending a
image.
• A file format setting was not included when the
destination was stored.
• If the file format is set when sending an image
or storing a destination, the settings apply to
the default file format settings.
G The "ONE PAGE PER FILE (YES/NO)" setting
is used to select how files are created when
multiple pages are scanned. Select "YES" to
have an individual file created for each scanned
page (so that multiple files are created). Select
"NO" to have all scanned pages combined into a
single file.
G The initial settings for the above programs are
as follows
• Black and white scanning
File type: PDF
Compression mode: HIGH (G4)
One page per file: No
• Color scanning
File type: PDF
Compression mode: MEDIUM
One page per file: No
Maximum size of e-mail attachments
To prevent the size of image files transmitted by
Scan to E-mail from becoming too large, you can
set a size limit.
If the total size of the image files created by
scanning the original exceeds the limit, the image
files are discarded. The limit can be set from 1 MB
to 10 MB in increments of 1 MB. The initial setting
is 2 MB. The limit cannot be disabled.
38
Imprimir página