Sharp DM-2010 Manual de servicio - Página 10

Navegue en línea o descargue pdf Manual de servicio para Impresora todo en uno Sharp DM-2010. Sharp DM-2010 13 páginas. Network laser system

Imprimir página
DM-2010
[6] UNPACKING AND INSTALLATION
For this item, refer to the DM-2000 Service Manual and the DM-FX1
Service Manual.
[7] ADJUSTMENTS
For this item, refer to the DM-2000 Service Manual and the DM-FX1
Service Manual.
[8] SIMULATIONS
1. Entering the simulation mode
A. Copy mode
The following key operations allow to enter the simulation mode from
the copy mode.
Clear key → Interruption key → "0" key → Interruption key → Main
code → Start key → Sub code → Start key
B. FAX mode
The following key operations allow to enter the simulation mode from
the FAX mode.
Clear key → Interruption key → "0" key → Interruption key → Main
code → Start key → Sub code → Start key
Or perform the following key operations:
"9" key → "
" key → "8" key → "#" key → "7" key
2. Cancelling the simulation mode
When the all clear key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.
* After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.
3. List of simulations
A. Copy mode
Main
Sub
code
code
1
1
Mirror unit operation check
2
Optical system sensor operation check
2
1
SPF aging
2
SPF sensor operation check
3
SPF motor forward rotation operation check
4
SPF motor reverse rotation operation check
8
SPF paper feed solenoid operation check
9
RSPF reverse solenoid operation check
10
RSPF paper exit gate solenoid operation
check
11
SPF PS release solenoid operation check
3
2
Shifter job separator sensor operation check
3
Shifter operation check
4
Job separator operation check
11
Shifter home position check
5
1
Operation panel display check
2
Heater lamp lighting check, cooling fan
motor operation check
3
Copy lamp lighting check
6
1
Paper feed solenoid operation check
10
Main cassette semi-circular roller drive
∗
Contents
B
B
B
B
B
E
E
B
Main
Sub
code
code
7
1
Aging with warmup time display
4
Warmup saving
6
Intermittent aging
8
Warmup time display
9
1
Duplex motor forward rotation operation
check
2
Duplex motor reverse rotation operation
check
4
Duplex motor rotation speed adjustment
5
Duplex motor switchback time adjustment
10
Toner motor operation check
14
Trouble (except for U2) cancel
16
U2 trouble cancel
20
1
Maintenance counter clear
21
1
Maintenance cycle setting
2
Mini maintenance cycle setting (Japan only)
22
1
Maintenance counter display
2
Maintenance preset value display (Japan
only)
3
JAM memory display
4
Total JAM counter display
5
Total counter display
6
Developing counter display
7
Developing preset counter value display
(Japan only)
8
SPF counter display
9
Paper feed counter display
12
Drum counter display
14
Copier ROM version display
22
15
Trouble memory display
16
Duplex print counter display
17
Copy counter display
18
Printer counter display
19
Electronic sort counter display
20
FAX print counter display
21
Scanner counter display
24
1
JAM memory, JAM counter clear
2
Trouble memory clear
4
SPF counter clear
5
Duplex counter clear
6
Paper feed counter clear
7
Drum counter clear
8
Copy counter clear
9
Printer counter clear
10
Electronic sort counter clear
11
FAX print counter clear
13
Scanner counter clear
25
1
Main motor operation check
10
Polygon motor operation check
6 – 1
∗
Contents
E
E
E
E
A
E
A
B
E
C
D
B
E
C
D