Sharp PN-L802B Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Impresora todo en uno Sharp PN-L802B. Sharp PN-L802B 9 páginas. Touchscreen
También para Sharp PN-L802B: Manual de instrucciones (48 páginas), Manual de instalación (28 páginas), Manual del usuario (13 páginas), Manual de inicio rápido (1 páginas), Manual de inicio rápido (1 páginas), Manual de inicio rápido (1 páginas), Manual de inicio rápido (28 páginas), Manual de inicio rápido (1 páginas), Manual de inicio (24 páginas), Garantía (2 páginas), Manual de configuración del software (46 páginas), Manual de conexión (1 páginas), Folleto y especificaciones (4 páginas)

Calibration

Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is

touched.

Caution

• Do not perform calibration in "Tablet PC Settings" in Control Panel. Calibration will not take place correctly.

• When setting the "Simple" on PN-L802B, change the screen size to "Wide" and set the "Advanced" beforehand. When the

screen size is "NORMAL" or "Dot by Dot" and the "Advanced" is set before the "Simple", the mouse cursor may be out of

position.

nCalibration Method

Simple

Select the currently displayed screen size ("WIDE", "NORMAL", "Dot by Dot"), and calibration takes place automatically.

Calibrate using advanced calibration if the mouse cursor is out of position when the touch pen is used.

TIPS

• When a key has been assigned to the "Easy Change" hot key setting, the key can be pressed to successively change a

setting.

Advanced

Calibration can be performed manually. Click "OK" to open the settings. Follow the on-screen instructions. (To cancel during

calibration, press the [ESC] key on the keyboard.)

When using the PN-L802B, if the position shifts with "4 Points", adjust using "25 Points". When adjusting at "25 Points", use the

touch pen. It may not be possible to correctly adjust with your finger.

nHot Key Setting

Hot keys can be set to perform the operations below. The [Ctrl] and [Shift] keys are fixed as hot keys. One of the A to Z or 0 to 9

keys can be selected for the third hot key.

Easy Change : The calibration method can be changed to "Simple" by pressing the hot key. Settings can be successively

changed by pressing the hot key.

Calibration

: The hot key can be pressed to open the Select Calibration screen.

Touch Panel Settings