Sharp SJ-43L-A2 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico Sharp SJ-43L-A2. Sharp SJ-43L-A2 8 páginas. Electric refrigerator
También para Sharp SJ-43L-A2: Manual de instrucciones (8 páginas), Manual de instrucciones (5 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (7 páginas)

Imprimir página

CARE AND CLEANING

Some household cleaning chemicals may af-

fect the internal food liner and plastic shelves

resulting in splitting or cracks occurring.

When cleaning all plastic

parts inside this refrigerator,

only use diluted dishwashing

liquid(soapy water). Make

sure that all plastic parts are

thoroughly rinsed with water

after cleaning.

1.Remove the shelves and pockets from the cabi-

net and door. Wash them in warm soapy wa-

ter; rinse in clean water and dry.

2.Clean the inside with a cloth soaked in warm

soapy water. Then, use cold water to wipe off

soapy water.

3.Wipe the exterior with a soft cloth each time it

is soiled.

4.Clean the Magnetic door seal with a toothbrush

and warm soapy water.

5.Whenever the refrigerator is moved to clean or

repositioned, the Evaporating pan should be

removed and cleaned.

NOTE:

• Do not use polishing powder, benzine, hot wa-

ter etc.

• If undiluted detergent is used or soapy water is

not wiped off thoroughly, cracking of plastic

parts can result.

• Wipe any food oils adhered to plastic compo-

nents as they can cause cracking of the plastic

surface.

WHAT TO DO BEFORE YOU CALL FOR SERVICE

Before you call for service, check the following point .

WHEN YOUR REFRIGERATOR DOES

NOT WORK

• Check that the power is switched on and that

the plug is correctly connected.

• Check with another appliance or lamp to see if

the outlet has electric current. The fuse be

blown or a circuit breaker tripped.

WHEN THERE IS A NOISE DURING OP-

ERATION

• Cabinet not level.

• Weak or uneven floor.

• The back of the cabinet touching the wall.

IT IS NORMAL for the refrigerator to produce the

following sounds.

• Loud noise produced by the compressor when

operation starts --- Sound becomes quieter af-

ter a while.

Evaporating pan;

How to remove/set

Remove the two screws to take the Evaporating

pan off. Please pay attention to the safety since

the compressor is very hot.

Compressor

Replacing the lamp bulb

Replace the lamp bulb with same type : base E12,

MAX 15W, T-20.

Make sure that the rated voltage and wattage of

the lamp bulb are correct when replacing. (Check

the label near the bulb.)

When replacing the lamp bulb, unplug the refrig-

erator to prevent electric shock.

Switching off your refrigerator

If you switch your refrigerator off when you are

going away for an extended period, remove all food,

clean the interior thoroughly. Remove the power

cord plug from the power socket and leave all doors

open.

• Loud noise produced once a day by the compres-

sor --- Operating sound produced immediately

after automatic defrost operation.

• Sound of flowing fluid (gurgling sound, fizzing

sound) --- Sound of refrigerant flowing in pipes

(sound may become louder from time to time).

• Cracking or crunching sound --- Sound produced

by expansion and contraction of inner walls and

internal parts during cooling.

• Squeaking sound --- Sound produced by expan-

sion and contraction of internal parts.

IT IS NORMAL that the outside of a cabinet may

be hot when touched. The hot pipe is in the cabi-

net in order to prevent dew generation.

IF YOU STILL REQUIRE SERVICE

Refer to your nearest service agent approved by

SHARP.

Evaporating

pan