Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Manual de instrucciones - Página 32
Navegue en línea o descargue pdf Manual de instrucciones para Proyector Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 49 páginas. Colour inkjet printer
También para Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector: Manual de instrucciones (49 páginas), Información básica y preparativos (10 páginas), Manual de instrucciones (47 páginas)
Imprimir página
Advanced Menu Settings
Set the colors as desired in accordance
with the image contents.
Subtle color settings are possible, as desired. Setting is
possible for each input.
1
Select the image to be input (page 20).
2
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "COLOR".
3
Use the cursor
"GAMMA".
4
Use the cursor
"GAMMA".
The following can be selected.
G Normal G Natural G Real G Custom
Normal is standard settings; Natural stresses
coloring; Real stresses brightness. Custom is used
to adjust freely as desired.
5
Use the cursor
"CUSTOM", press the ENTER button to
display the sub-menu and then set the
gamma value. There are 33 index values.
Adjusting Color Balance
Color balance (white balance) can be set for each input.
1
Select the image to be input (page 20).
2
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "COLOR".
3
Use the cursor
"COLOR TEMP".
4
Use the cursor
"COLOR TEMP".
Four different types of color balance can be set
beforehand: Low, Middle, Normal and High.
When the ENTER button is pressed, the sub-
menu will be displayed to enable fine
adjustment.
30
/
/
keys to select
/
keys to set the
/
keys to select
/
/
keys to select
/
keys to select the
Setting the Video Type
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "COLOR".
2
Use the cursor
TYPE".
3
Use the cursor
TYPE".
The following can be selected.
G DVD G VCR
DVD is used for DVD players and Video is used for
normal video players.
Selecting the Color System
The following color systems can be used with this unit.
G NTSC G NTSC 4.43
G PAL
G PAL-M
G PAL-N
G SECAM
• Only "NTSC" and "PAL" can be used for component video.
• Selection is automatic when "AUTO" is used.
• "AUTO" cannot be set for PAL-M and PAL-N input signals. Select
"PAL-M" or "PAL-N" in "COLOR SYSTEM" menu for PAL-M and
PAL-N input signals.
1
Select an input for the color system to be
selected (page 20).
2
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "COLOR".
3
Use the cursor
"COLOR SYSTEM" and then press the
ENTER button.
4
Use the cursor
desired color system.
To close the menu
Press the R-CLICK/EXIT button.
/
/
keys to select "VIDEO
/
keys to set the "VIDEO
G PAL60
/
/
keys to select
/
keys to select the