Sharp PG-A10X - Notevision XGA LCD Projector Especificación
Navegue en línea o descargue pdf Especificación para Proyector Sharp PG-A10X - Notevision XGA LCD Projector. Sharp PG-A10X - Notevision XGA LCD Projector 2 páginas. Setup and operate
También para Sharp PG-A10X - Notevision XGA LCD Projector: Hoja de especificaciones (2 páginas), Especificaciones (2 páginas), Manual de inicio rápido (2 páginas)
Imprimir página
[White]
PG-A10X/S
Optional Accessories
Remote Receiver
Cables
AN-C3CP
AN-MR1EL
3-RCA to 15-pin
D-sub cable (3 m)
AN-C10BM
Computer RGB cable
15-pin mini D-sub
male connector (10 m)
Replacement Parts:
Lamp unit BQC-PGA10X//1
Specifications
Model
LCD panel
Panel size
Drive system
No. of pixels
Lens
Projection lamp
Luminance
Contrast ratio
Luminance ratio
Lamp life
Fan noise
Audio output
Speakers
Power source
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Video colour signals
RGB input signals
SXGA+/SXGA/Mac 21" (in intelligent compression), XGA, SVGA, VGA,
PC-98, VESA, Mac 19"/16"/13", 15-70 kHz (horizontal), 43-85 Hz (vertical),
Input terminals
Computer input signals
Video input signals
Other
Cabinet
Dimensions
Weight
Supplied accessories
Design and specifications are current as of March 2003, but are subject to change without prior notice.
SHARP CORPORATION
OSAKA, JAPAN
U R L
h t t p : / / w w w . s h a r p - w o r l d . c o m /
AN-C3BN
5-BNC to 15-pin
D-sub cable (3 m)
AN-C10RS
RS-232C serial
control cable (10 m)
PG-A10X/A10X
-SL
2,359,296 pixels (786,432 dots x 3)
1,300 ANSI lumen (Standard mode)/1040 ANSI lumen (Eco mode)
450:1
240W (Standard mode)/190W (Eco mode) with AC 100V; 226W (Standard mode)/182W (Eco mode) with AC 240V
900 BTU/hour (Standard mode)/710 BTU/hour (Eco mode) with AC 100V; 850 BTU/hour (Standard mode)/680 BTU/hour (Eco mode) with AC240V
NTSC/NTSC 4.43/PAL/PAL(60Hz)/PAL-M/PAL-N/SECAM/DTV (480I/480P/540P/580I/580P/720P/1035I-50Hz/60Hz)
12-108 MHz (pixel clock) (plug & play VESA, DDC 1/28)
Computer RGB/component x 1(15-pin mini D-sub), audio L/R x 1 (3.5 mm mini jack)
Remote control, R-6 battery (x2), power cord, RGB cable, DIN-D-sub RS-232C adaptor, carrying case, lens cap,
extra air filter, projector manual and technical reference CD-ROM, "QUICK GUIDE" label, operation manual
[Silver]
PG-A10X
/PG-A10S
-SL
Ceiling
Mounts
Poly Silicon 0.79" (2.0cm)
Active Matrix TFT
1:1.2 manual zoom and focus, F1.9-2.2, f=26-31mm
165W (SHP) lamp
1,500 ANSI lumen (Standard mode)/1200 ANSI lumen (Eco mode)
95%
4,500 hours (Eco mode)/3,000 hours (Standard mode)
31dB (Eco mode)/35dB (Standard mode)
1W (mono)
2.8 cm (round) x 1
100~240V AC, 50/60 Hz (multi-voltage)
5W (AC 100V) – 8W (AC 240V)
+5 C to +35 C
-20 C to +60 C
SXGA+/SXGA/XGA/Mac 21"/19"(in intelligent compression), SVGA, VGA,
PC-98, VESA, Mac 16"/13", 15-70 kHz (horizontal), 43-85 Hz (vertical),
Video x 1 (RCA), S-video x 1
RS-232C serial port x 1 (8-pin mini Din)
Plastic
297 x 81 x 229 mm (main body only)
297 x 89 x 229 mm (including adjuster and projecting parts)
2.9 kg
1N0072N © SHARP CORP. (MAR. 2003 PRINT) I 1.2 E Printed in Japan
-SL
AN-TK201
For high ceiling
installation
PG-A10S/A10S
-SL
1,440,000 pixels (480,000 dots x 3)
400:1
12-108 MHz (pixel clock) (plug & play VESA, DDC 1/28)
Pixelworks ICs are used in this projector.
AN-TK202
For standard
ceiling installation
AN-A10T
Installation adaptor