Sharp PG-D2710X Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Proyector Sharp PG-D2710X. Sharp PG-D2710X 9 páginas. True xga data projector
También para Sharp PG-D2710X: Manual de instalación (26 páginas), Manual rápido (2 páginas), Especificación (2 páginas), Especificaciones (2 páginas), Especificaciones (2 páginas), Especificaciones (2 páginas)

Precautions on viewing stereoscopic 3D images

Before viewing stereoscopic 3D images, please read this section carefully.

WARNING

■

Under normal conditions, viewing stereoscopic 3D images is safe for any duration that you

would normally view your screen. However, some people may experience discomfort. The

following precautions are recommended to minimize the potential for experiencing visual

problems or any adverse symptoms.

■

Take regular breaks, at least 5 to 15 minutes after every 30 to 60 minutes of stereoscopic

3D viewing.

* Based on the guidelines issued by the 3D Consortium revised December 10, 2008.

■

Maintain an appropriate distance from the screen. Viewing from too close a distance can

strain your eyes. If you experience eye strain, immediately discontinue viewing.

If you experience any of the following symptoms during viewing:

– nausea

– queasiness/dizziness

– headache

– blurry vision or double vision that lasts longer than few seconds

Do not engage in any potentially hazardous activity for example, driving a vehicle until

your symptoms have completely gone away.

If symptoms persist, discontinue use and do not resume stereoscopic 3D viewing without

discussing your symptoms with a physician.

As you get more comfortable viewing stereoscopic 3D:

•

Adjust the parallax on the 3D-video playback equipment. (You may not be able to adjust the

parallax on some models of equipment.)

•

Adjust the projected image to the most comfortable viewing size by zooming.

(Projecting images on the smallest or largest screen size possible may eliminate the

stereoscopic effect and strain your eyes.)

•

Use the DLP

Link™ Invert function to properly set the video for your left and right eyes. (For

details on using DLP

manual.)

Link™ Invert , see the section on its operation in this operation