Sharp PG-M20 Series Hoja de referencia de inicio rápido - Página 3

Navegue en línea o descargue pdf Hoja de referencia de inicio rápido para Proyector Sharp PG-M20 Series. Sharp PG-M20 Series 5 páginas.

SmartPanel Projector Driver Application Note

D. Relays

The following table specifies the factory preset

settings for the low-current relays found on the rear

of the SmartPanel. The Configuration Utility can

be used to customize these settings your installation.

Relay 1

ON Maintained

Relay 2

ON Momentary

Relay 3

OFF Momentary

Selection

Momentary; not Binary

E. Other Presets

The following table specifies other default factory settings for this Driver that affect is control of the

Projector.

Power Status Feedback Method

Control Wiring Option

Control for the Sharp with this Driver is via both RS-232 and IR/Wired Remote. We recommend wiring for

the Wired Remote but the included IR emitter may also be used.

The following table specifies settings for the Panel's configurable timers. For more information on the

inactivity shutdown feature and the lockout timer see the SmartPanel Configuration and Installation

Manual

Lockout Timer

Inactivity Shutdown

Sensor (see note 1)

IR-Emitter (see note 2)

100 seconds (see note 3)

Disabled

RELAYS

PWR

OFF

MAINT.

MOM.

Sharp PG-M20x

500mA MAX. CURRENT

SELECTION

(EXT. SWITCHER CTRL)