Sharp PGF325W - WXGA DLP Projector Manual de instalación - Página 23
Navegue en línea o descargue pdf Manual de instalación para Proyector Sharp PGF325W - WXGA DLP Projector. Sharp PGF325W - WXGA DLP Projector 34 páginas. Wxga (1280 x 800) 2500 ansi lumens, data/video projector
También para Sharp PGF325W - WXGA DLP Projector: Hoja de especificaciones (2 páginas)
Imprimir página
Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the
details to be set. Setting is carried out one item at a time, and saved at the end.
View Setting Detail List
([V]View All Setting)
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>v
Model Name
: XX-XXXX
Projector Name
: XX-XXXX
MAC Address
: XX:XX:XX:XX:XX:XX
DHCP Client
: Disable
IP Address
: 192.168.150.2
Subnet Mask
: 255.255.255.0
Default Gateway
: Not Used
RS-232 Baud Rate : 9600 bps
Password
: Not Required
**********(Advanced Status)**********
Data Port
: 10002
Accept IP Address : Accept All
Auto Logout Time
: 5 minutes
Search Port
: 5006
1 1 1 1 1 Enter "v" and press the "Enter" key.
Display all setting values(*).
Setting up the Projector Using RS-232C or Telnet
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
1
*
Set Items
Example: When setting IP Address (change from
192.168.150.2 to 192.168.150.3)
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>1
IP Address
: 192.168.150.2
Please Enter
: 192.168.150.3
(change)
—> 192.168.150.3
---------------------------------SETUP MENU--------------------------------
[1]IP Address
[2]Subnet Mask
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
[V]View All Setting
[S]Save & Quit
setup>v
Model Name
: XX-XXXX
Projector Name
: XX-XXXX
MAC Address
: XX:XX:XX:XX:XX:XX
DHCP Client
: Disable
IP Address
: 192.168.150.3
Subnet Mask
: 255.255.255.0
Default Gateway
: Not Used
RS-232C Baud Rate : 9600 bps
Password
: Not Required
**********(Advanced Status)**********
Data Port
: 10002
Accept IP Address : Accept All
Auto Logout Time
: 5 minutes
Search Port
: 5006
1 1 1 1 1 Enter "1" (number of item to be set), and press
the "Enter" key.
Display current IP address (*1).
2 2 2 2 2 Enter IP address to be set and press the "En-
ter" key.
Display IP address after change (*2).
3 3 3 3 3 Enter "v" and press the "Enter" key to verify
setting detail list.
IP address is being changed (*3).
Note
• Verification of setting detail list can be omitted.
• Setting details are not effective until they have
been saved. (Page 24)
• If an invalid number is entered, an error message
("Parameter Error!") will be displayed.
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
1
*1
2
*2
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
3
*3
-23