Sharp XG-E1200U Manual de instrucciones - Página 22

Navegue en línea o descargue pdf Manual de instrucciones para Proyector Sharp XG-E1200U. Sharp XG-E1200U 40 páginas.

Imprimir página

Basic Operation of the Projector

1
A.C.120V
C.A.120V
ON
OFF
2
MAIN
POWER
switch
2
ON
OFF
3
Projector
ON/OFF
ON/OFF
When the power is on, the LAMP
ON/OFF
REPLACEMENT indicator flashes
to show the operating condition of
POWER
the lamp.
Green:
LAMP
Flashing green:
TEMP.
Red:
4
E-ZOOM (ON)
1
AC cord
ON/OFF
When the MAIN
POWER is on, the
POWER
POWER indicator
lights red.
LAMP
TEMP.
Remote control
ON/OFF
ON
OFF
Lamp is ready
Warming up
Change bulb
E-ZOOM (OFF)
1. Connect the AC cord.
Connect the supplied AC cord to the AC inlet on the side
of the projector .

2. Turn on the MAIN POWER.

Press the MAIN POWER switch on the side of the projec-
tor. The POWER indicator lights red and the projector
enters STANDBY mode.
3. Turn on the POWER.
Press the POWER ON/OFF button on the projector or the
POWER ON button on the remote control.
When the power is turned off by pressing the POWER
ON/OFF button, the POWER indicator will not turn off
until the fan has stopped running.
See page 33, "Lamp/Maintenance Indicators" for
details.
Notes:
When the POWER indicator is not lit, the remote control
cannot be used to operate the projector.
If the power is turned on immediately after it has been turned
off, it may take a short while before the lamp turns on. (During
this period the LAMP REPLACEMENT indicator flashes.)
After the projector is unpacked and turned on for the first time,
a slight odor may be emitted from the exhaust fan. This odor
will soon disappear with use.
4. E-ZOOM Function
This projector has an E-ZOOM mode which enlarges the
display when inputting an image of less than 800
dots in size. The E-ZOOM button on the projector or on
the remote control is used to operate E-ZOOM function.
See page 28, "E-ZOOM Function" for details.
Notes:
E-ZOOM function does not operate in SVGA (800
16" (832
624), NTSC, PAL or SECAM INPUT mode.
The picture size differs in RGB, NTSC, PAL and SECAM
INPUT modes.
600
600), Mac
E-22