Sharp XG-NV2SB Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Proyector Sharp XG-NV2SB. Sharp XG-NV2SB 40 páginas. Sharp lcd projector operation manual xg-nv2sb
Imprimir página
Example of a standard setup
TOP VIEW
90˚
The projector lens should be centered
in the middle of the screen.
Using the horizontal reverse function makes the following setups possible.
Example of a reversed image setup
• By placing a mirror (normal flat type) in front of the lens and using the horizontal reverse function, the image reflected from
the mirror can be projected onto the screen.
• Rear projection with a rear projection screen is also possible when using the horizontal reverse function.
90˚
Mirror
The projector lens should be centered
in the middle of the screen.
Example of a ceiling-mount setup
Before mounting the projector, be sure to contact your nearest Authorized Sharp Industrial LCD Products Dealer to
obtain the manufacturer recommended ceiling mount bracket (sold separately). (AN-XGCM40 Ceiling Mount
Bracket, AN-EP101AP Extension Tube for AN-XGCM40.)
TOP VIEW
90˚
• If the relative positions of the projector and the screen are not properly adjusted, the picture will be distorted.
Note:
• A polarizing screen cannot be used with this projector.
Lens center
AUDIENCE SIDE
Lens center
SIDE VIEW
Lens center
90˚
If the projector and screen are not
centered properly, the picture will be
distorted, making viewing difficult.
Rear Projection
90˚
If the projector and screen are not
centered properly, the picture will be
distorted, making viewing difficult.
SIDE VIEW
90˚
Lens center
E-12