Digital Acoustics IP7-FX Manual de introducción - Página 3
Navegue en línea o descargue pdf Manual de introducción para Unidad de control Digital Acoustics IP7-FX. Digital Acoustics IP7-FX 4 páginas. Talkmaster
También para Digital Acoustics IP7-FX: Manual de introducción (4 páginas)
Imprimir página
TalkMaster Configuration
The IP7-FX must be configured using the TalkMaster FOCUS Administrator console. TalkMaster™ FOCUS is a suite
of Windows® based application used to configure and manage Digital Acoustics IP7™ and ii3™ Intercoms and Paging
endpoints. Applications included with the TalkMaster Server are the Administrator Console for configuration of the
Server and IP Endpoints and the Operator Console for managing 2-way Intercom calls and 1-way Paging
announcements.
If the TalkMaster Administrator console has already been installed and the defaults have been setup, skip to the
Configure Endpoint step.
• Download and run the TalkMaster FOCUS Installer from https://www.digitalacoustics.com/support/software-firmware-
downloads/
• Click the Install TalkMaster Server/Admin Console button
• Several modules will be installed. Continue accept the defaults till the installation is complete
• Click the Install Operator Console button and accept the defaults to complete the installation
• From the Windows Start menu, select TalkMaster FOCUS → TalkMaster
FOCUS Administrator
• Logon with an Operator ID of admin. The default password is admin
Configure Defaults
• Click the Setup → Defaults → Endpoint Defaults tab and setup defaults to
be used for configuring IP Endpoints. For instance, if the IP7's will all use
DHCP, enable the Assign Automatically with DHCP and check the option
or if the Endpoints will be connected to a different TalkMaster Server, enable
the Server IP Address and enter that server's IP Address and Port
Configure Endpoint
• Select the IP Endpoints tab and press the FIND ALL button in the
lower right-hand corner of the screen. Newly discovered IP
Endpoints appear in the list box to the left
• Click on the IP Endpoint to be configured (match
the "Icom ID" column to the Intercom's previously
recorded ID#)
Page 3 of 4
Digital Acoustics IP7-FX
Installation and SIP Configuration